Installing NetFx3 on Windows Server 2012

image

Okay… I am installing SQL Server 2012 on a Windows Server 2012 box, there shouldn’t be any problems.  Everything is proceeding normally until I get this message:

Error while enabling Windows feature : NetFx3, Error Code : –2146498298 , Please try enabling Windows Feature : NetFx3 from Windows management tools and then run setup again.

No problem… I know how to install Windows Features; I start the Add roles and Features Wizard and go looking for NetFx3… it’s not there.

Problem.

It turns out that Windows Server 2012 does not include NetFx3 when it is installing.  It doesn’t mean that it is gone, but it does have to be installed separately.  Here’s what you do:

1) Insert your Windows Server 2012 media.  As I was installing SQL Server in a Hyper-V VM I ejected the SQL media and attached my Windows Server 2012 ISO.  I then checked to see what drive letter it was (D:).

2) I opened a Command Prompt with administrative credentials.  From the Start Screen I typed CMD but instead of clicking on it or pressing ENTER I right-clicked, and at the bottom clicked on Run As Administrator.

3) From the Command Prompt I typed the following command:

dism /online /enable-feature /featurename:netfx3 /all /source:d:\sources\sxs

image

The Deployment Image Servicing and Management tool is one of the easiest ways to install features in Windows when the GUI fails you. 

Note: Unfortunately, if you encounter this error you will have to restart your installation of SQL Server.  That doesn’t mean you should cancel it out at this point… what I did was I left the error message on the screen while I resolved the NetFx3 issue, and then let it resume.  The SQL Server installation succeeded, with several failures.  I then went back and re-installed SQL on top of the old, with the features that I needed.  It worked just fine for me, and it should for you.

Advertisement

81 responses to “Installing NetFx3 on Windows Server 2012”

  1. SQL Server 2012 Installing on Windows Server 2012, Error while enabling Windows feature : NetFx3, Error Code : –2146498298…

    1.安裝過程發生Error while enabling Windows Feature NetFx3, Error Code : –2146498298 的警告。 Error while…

    1. Hasitha Maduranga Avatar
      Hasitha Maduranga

      ENABLE THE .NET FRAMEWORK 3.5 IN CONTROL PANEL.
      screen shots:http://articledwh.blogspot.com/2016/05/problemsql-server-2012-install-error.html

  2. Stephen Wyndham Avatar
    Stephen Wyndham

    Nice work

  3. Thank you.

  4. Thanks for sharing the article.
    For me I did not get the above error but the setup was stuck for longer at stage Enabling OS Feature NetFx3. I guess I had to wait more to get the above error. I ran this command while the setup was stuck. The command went well and the setup was able to proceed further.

    Thanks,
    Rahul Babar

  5. Thanks a lot! Exactly what I needed!

  6. Thanks Mitch ur solution really worked for me

  7. got a message that the source files could not be downloaded with error code 0x800f0906 after 66.3% completed. Anyone experience this and get a resolution?

    1. Did you manage to get it going. Have the same error

      1. Yes… follow the instructions in my article 🙂

      2. Thanks, Tried your suggestion – but no joy here. I have the cd mounted in drive E, tried it there, and also copied the /sources/sxs folder to D:\ (D:\sources\sxs\).
        Any Idea what I’m doing wrong here?

        ————————–
        C:\Windows\system32>dism /online /enable-feature /featurename:netfx3 /all /source:d:\sources\sxs /LimitAccess (also tried without limitaccess)

        Deployment Image Servicing and Management tool
        Version: 6.2.9200.16384

        Image Version: 6.2.9200.16384

        Enabling feature(s)
        [===========================66.6%====== ]

        Error: 0x800f0906

        The source files could not be downloaded.
        Use the “source” option to specify the location of the files that are required t
        o restore the feature. For more information on specifying a source location, see
        http://go.microsoft.com/fwlink/?LinkId=243077.

        The DISM log file can be found at C:\Windows\Logs\DISM\dism.log

      3. —>Solution:
        To fix it, what I ended up doing was sharing out the C:\Windows\WinSxS folder from another 2012 box on the same network. Then mapped that share in the local server.
        Then pointed the server giving me these errors to that share, and wallah!
        For some reason it would not accept the source as local files on the server. Even mouonting the iso on a virtual drive it wouldn’t accept them.

        I’m guessing the local binaries on that server were corrupt or something.

      4. Hi Josh,
        That is great news! I was going to offer a few suggestions, but thank you for sharing the solution. -M

      5. I had the same issue, at the end of the day we realised we had the wrong ISO version mounted.
        We have Server 2012 Standard and the mounted ISO version was Server 2012 Standard R2.

        After mounting the correct ISO all was good!

  8. Spot on!
    Thank you

  9. How to install SQL Server 2012 for the first time

    This page will record the various trials and tribulations to getting SQL Server 2012 to work in Hosting for the first time. SQL Installation fails with “error while enabling windows feature: netfx3” See here:

  10. Simply installing the Application Server Role and choosing to include .NET 3.5 will resolve this issue as well.

    1. While that is true, it adds more than you need. Your choice 🙂

  11. Thanks, saved me bunch of time.

  12. I got same error as per above while installing SQL Server 2012. I tried numerous times executing the command and to no avail. I then connected the server to the internet and the error was gone. Still cant figure out what the internet connection resolved as the installation never showed its downloading anything !!!

    1. yea excellent Brther
      i was also stuck on NetFx3 but after read your comment i disconnect my ineternet connection and again connect then it move forword
      Thanks

  13. thank you very much for that… exactly the same problem for me !

  14. […] : NetFx3, Erreur Code : –2146498298 “. Je l’ai résolue grâce à un billet de Mitch Garvis (il faut remonter l’iso Windows Server 2012 et lancer l’installation en ligne de […]

  15. Superb – thankyou very much

  16. You rock dude! Saved my bacon.

  17. The same problem the same solution,
    ThankYou

  18. TP 01 Installation de SQL 2012 sur Windows 2012 R2 Preview

    TP 01 Installation de SQL 2012 sur Windows 2012 R2 Preview

  19. It Works!! Thank’s!

  20. Thanks, worked great. I used software called Pismo to just mount the .iso file for Windows Server. No CD needed and you don’t have to unmount or take out your SQL CD.

  21. Why didn’t you just right-click & mount haha?!?
    ISO mounting is built into NT 6.2

  22. Many thanks… worked perfectly for me! Being that I’m a sys admin who has fallen into an occasional DBA role, I’m glad to see it wasn’t as convoluted as I had originally feared.

  23. Actual, you just need to check if ***Windows Update service is running****. If stopped, then NetFx3 will not be enable.

    1. Not true for me: The service is running, the error message is there.

  24. Hi there,

    my .NET 3.5 install is just stuck here:
    —-
    C:\Users\administrator.DOMAIN> dism.exe /online /enable-feature /all /featurename:NetFX3 /Source:D:\sources\sxs /LimitAccess

    Tool zur Imageverwaltung für die Bereitstellung
    Version: 6.3.9600.16384

    Abbildversion: 6.3.9600.16384

    —-
    It just doesn’t get any further for about two hours now.

    Any Ideas what is wrong?

    1. Hi Michael,

      I wish I could help… unfortunately I don’t speak German. Good luck though. -M

      1. Hi Mitch,

        that is the output from the dism tool like in your last screenshot. But it is stopping with the
        “Image Version: 6.3.9600.16384”
        And not starting to enable the features. I’m stuck there.

        Currently I am rebooting after 2 Windows Updates Installations. But I don’t think that this was the solution. So I would appreciate any help.

        Best Regards,
        Michael

      2. Hi Michael,
        I wish I had the time to help… I think your best bet would be posting to the TechNet Forums. Good luck! -MDG

      3. Hi Mitch,
        after installing the Windows Updates on this server the feature installation worked via the GUI. I hope this information helps other users browsing your site.
        Regards

  25. […] Courtsey-https://garvis.ca/2013/01/04/installing-netfx3-on-windows-server-2012/ […]

  26. […] the command line geeks amongst us, read the following blog post on how to enable .NET 3.5 using […]

  27. Many thanks, you save my life !

  28. worked like a charm, THANKS!

  29. thanks for the help!!!

  30. Thanks for the solution and additional comments!

    To avoid dism.exe errors I had to use instead:
    Add-WindowsFeature NET-Framework-Core -Source D:\sources\sxs

    1. I am so glad 🙂 Thanks for letting me know 🙂 -MDG

  31. Thanks for the post – just going through the rest of the fix now.

  32. […] quick search led me to “The World According to Mitch”, which has a useful post “Installing NetFx3 on Windows Server 2012″ that shows this very error (complete with screenshot, if you really need to see […]

  33. Thanks for the great post! I was able to use it successfully.

    Another item that you may consider since you have to start your install over again is to use the Configuration File that was originally generated. In the Summary file, look for an entry called “Configuration File:.” After successfully installing .NET 3.5, restart the SQL Server Installation but choose Advanced, then Install based on configuration file. Then navigate to the path found earlier. This will prefill all the entries based on what you chose the first time. The only thing you have to do is retype the passwords for the service accounts if you changed those.

  34. This really helped me out. Thank you.

  35. yes it really helped me. Thank you so much.

  36. Belzaleel Madrigal Jasso Avatar
    Belzaleel Madrigal Jasso

    Thanks!,

  37. its not working it given me about 87errors and feature name is not found ,when using d administrative cmd prompt .i realy need help and i dont kno what to do

  38. hope you notice me.. is it only applicable for 32bit pc? how about 64bit? I;m using 64bit.. ><

    1. It works on x64… There is no x86 version of Server 2012 😉

      1. okay thanks.. already solved it.. thanks

      2. by the way, can I asked again? have you encountered an unhandled win32 scenarioengine.exe error during installation of SQL Express 2012?

  39. Thanks, it worked!

  40. Diego Benedictos Jr Avatar
    Diego Benedictos Jr

    Thank you Mitch!

  41. Worked great for me, THANK YOU!

  42. The installation was stuck on NetFx3 so in anticipation I had CMD all up and ready with your solution, but then the installation carried on to finish 😦 Thanks for the tip though!

  43. by following the above address i am getting this error in my CMD

    The referenced assembly is not installed on your system.

    The DISM log file can be found at C:\Windows\Logs\DISM\dism.log.

    Can you please rearrange the path according this?

  44. Thank you for this– it worked well. I did not have access to the original Server 2012 media, so downloaded the ISO file from the TechNet site as an evaluation, mounted it as virtual drive, and used your command line. Brilliant.

    1. Khadijat Mukhtar Avatar
      Khadijat Mukhtar

      No On 16 Jan 2016 02:42, “The World According to Mitch” wrote:

      > martinyates1 commented: “This didnt work for me, but I found a way to > install with the features wizard > http://sqlblog.com/blogs/sergio_govoni/archive/2013/07/13/how-to-install-netfx3-on-windows-server-2012-required-by-sql-server-2012.aspx > ” >

  45. elizbeth truss Avatar
    elizbeth truss

    Valuable piece , I was fascinated by the points . Does someone know if my assistant might be able to obtain a sample a form form to work with ?

  46. you save my day.
    thank you lot

  47. […] Installing NetFx3 on Windows Server 2012 | The World According to. – Jan 4, 2013. Okay… I am installing SQL Server 2012 on a Windows Server 2012 box, there shouldn't be any problems. Everything is proceeding normally until I get this message: Error while enabling Windows feature : NetFx3, Error Code : – 2146498298 , Please try enabling Windows Feature : NetFx3 from Windows. […]

  48. Josh… thank so much… this ones a killer, your idea to share, then map worked for me. Enjoy a little bit of a spring in your step with then karma bump 😉 All the best (to everyone here including the OP, of course).

Leave a Reply to vCenter Server SQL Server 2012 installation | Nicholas Gerasimatos – Managing virtual environments with VMware, Cisco UCS, and OpenStack Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: